LED Flood Light — High Lumen IP67 Outdoor Floodlights from a Guangzhou Manufacturer

An LED flood light is the workhorse of outdoor illumination: it throws a wide, even wash of light across large surfaces where a narrow beam would leave dark gaps. For building facades, yards and parking areas, billboards, sports courts and tunnels, floodlighting has to do two things at once — deliver enough lumens to be seen from a distance, and survive years of rain, dust, heat and vibration without service calls. This page covers the BLUESWIFT range of high lumen and IP67 outdoor remote-control floodlights built for exactly those conditions, and explains how project buyers, distributors and contractors can specify the right wattage for each site.

Why Specify BLUESWIFT LED Flood Light Fixtures

BLUESWIFT is the lighting brand of Guangzhou Blueswift Electric Co., Ltd., a manufacturer and trading company founded in 2011 in Guangzhou, China. The brand itself has been present in the lighting sector since 2002, and the company operates a 1,000–3,000 sqm factory with 4 production lines and a team of 11–50 people. For buyers sourcing LED flood light fixtures for tender packages or distribution, that combination of scale and focus matters: enough capacity to hold a schedule, and enough specialization to keep quality consistent batch to batch.

Every fixture is aged and tested lit for 12 hours before shipment. Certifications include CE, RoHS, CB, SAA, ISO9001 and IEC60598, with certificates available upon request. Products are exported to 82 countries, with the largest shares in South America (33%), Southeast Asia (15%), Africa (14%), the Middle East (10%) and East Europe (10%) — markets where heat, humidity, salt air and unstable grids put outdoor fixtures under real stress. The line includes high lumen LED flood light and tunnel light models plus COB flood lights, so a single supplier can cover facade, yard, sports and tunnel scopes in one purchase order.

IP67 and Remote-Control Models for Harsh Outdoor Use

Two features separate outdoor-grade floodlights from general-purpose ones: ingress protection and control flexibility.

IP67 sealing means the housing resists dust ingress and withstands temporary immersion. In practice, that is the rating you want for coastal installations, monsoon-exposed sites, washdown areas and any location where the fixture will sit in standing water after heavy rain. When comparing quotations, an LED flood light with a genuine IP67 rating is almost always cheaper over the project life than an IP54 or IP65 unit that needs ladder work and replacement parts in year two.

Remote-control models allow switching, dimming or scene control without rewiring or adding a contactor panel. For sports areas, yards and billboards where the client wants different light levels at different times, remote control removes a layer of electrical work from the installation and makes retrofits simpler.

For tunnels, the same high lumen platform is offered as a tunnel light, giving maintenance teams a common fixture architecture across tunnel and approach lighting.

Wattage Selection Guide: 50W, 80W, 140W and 150W

The range is available in 50W, 80W, 140W and 150W. Mounting distance and target surface area should drive the choice, not the other way around.

50W — small yards, signage close-ups, entrances, secondary facade accents, and short mounting heights.
80W — mid-size yards, billboards at moderate distance, car parks, and perimeter walls.
140W / 150W — large building facades, sports and recreation courts, wide hardstanding areas, and tunnel sections requiring sustained high output.

As a working rule: measure from the mounting point to the furthest edge of the area that must be lit, then match the wattage to that throw distance rather than to the total site size. If two fixtures at 80W cover the area more evenly than one at 150W, the two-fixture layout usually produces better uniformity and less glare.

Sites with no grid connection at all should not be forced onto mains floodlights. Solar-powered options are the logical answer for remote plots, and the same catalogue covers them — see Solar Flood Lights for off-grid flood lighting. Where a floodlight shares a pole or an outdoor lighting scheme with roadway fixtures, our LED Street Light range is the matched counterpart, and for high mounting heights indoors or under canopies, the LED High Bay Light series covers the same project scope.

Specifications

Product type: LED flood light / high lumen LED flood light, with tunnel light variants and COB flood lights also in the line
Power options: 50W, 80W, 140W, 150W
Ingress protection: IP67 (outdoor models)
Control: remote-control models available
Certifications: CE, RoHS, CB, SAA, ISO9001, IEC60598 — certificates available upon request
Testing: 100% of fixtures aged and tested lit for 12 hours
Manufacturer: Guangzhou Blueswift Electric Co., Ltd., founded 2011; BLUESWIFT brand in lighting since 2002
Factory: 1,000–3,000 sqm, 4 production lines, 11–50 staff
Lead time: 15–25 days typical; 25–35 days for OEM and custom work
MOQ: typically 500–1000 pcs, mixed container negotiable; OEM from 1000 pcs
Payment terms: T/T, L/C, PayPal, Western Union
Trade terms: FOB, CFR, CIF, EXW, DDP, DDU
Export markets: 82 countries; South America 33%, Southeast Asia 15%, Africa 14%, Middle East 10%, East Europe 10%
Supplier status: onsite-checked supplier on Alibaba

Sourcing, Sampling and Custom Requirements

Because the factory runs both manufacturing and export trading, buyers can place a standard LED flood light order at factory-direct pricing or move into OEM work — housing colour, branding, packaging and connector choices — from 1000 pcs. Distributors and wholesalers often start with a mixed container trial across floodlights, street lights and high bays, which keeps the MOQ at 500–1000 pcs per configuration while still filling a shipment.

Lead time is 15–25 days for standard orders and 25–35 days for OEM and custom runs, which fits comfortably into most tender and project schedules provided the specification is confirmed early. If you need rating documents for a submittal, CE, RoHS, CB, SAA, ISO9001 and IEC60598 certificates are available on request. Tell us the application, mounting height and area to be lit, and our sales team will recommend wattage and quantity options that fit your site — without overlighting and without wasting budget on fixtures the site does not need.